LiteAide Motion Sensor Security Lighting System

LiteAide Motion Sensor Security Lighting System

The motion sensor light comes Preassembled Automatic Security Floodlight Sensor Lighting System.

Your security floodlight uses two 150 watts (maximum) incandescent, quartz, or halogen flood lamps (not included). (We also sell the LED or Incandescent floodlight bulbs for this security lighting system)

Locate the security floodlight at least 8 feet above the ground. 

Do not install the security floodlight above a heat pump, air conditioner, heater, electric light, or similar devices. 

Avoid pointing the security floodlight sensor toward a reflective surface such as a window, swimming pool, or similar reflective surface. 

Automatic Operation

To place the security floodlight in the automatic mode, turn the wall switch off, then turn it back on after 5 seconds or longer. The security floodlight will come on for the time duration set and then turn off. You may now leave the wall switch ON continuously.

The security floodlight will only come on in darkness when it detects something in the pattern and will go off at the end of the time period.