Car amplifiers that are designed to operate efficiently at loads down to 2Ohms. This means that you can install four 8 Ohm speakers per channel when usingparallel wiring. Increasing the number of woofers per channel at low frequencies (below 100Hz) producesan acoustic coupling effect. This acoustic coupling effect increases your power outputby about 3dB per…
TROUBLESHOOTING the operating environment the car amplifier is working under. Before removing your car amplifier, refer to the list below and follow the suggested procedures. Always test the speakers and their wires first. AMPLIFIER WILL NOT POWER UP Check for good ground connection. Check that the remote DC terminal has at least 7V DC this…
Before removing your amplifier, refer to the list below and follow the suggested procedures. Always test the speakers and their wires first. Amplifier Will NOT Power UP or ON Check for good ground connection. Check that remote DC terminal has at least 7V DC. Check that there is battery power on the + terminal. Check…
Speaker connection – Never connect cables with the chassis ground. This may destroy your amplifier. Check that your speakers are connected correctly which means plus (+) to plus (+) and minus (-) to minus (-). Recommended speaker cable from 2.25mm to up. BATT+ – Battery + terminal. The +12 Volt power cable must be connected with a…
